app-temporal-filtering

APP UNDER DEVELOPMENT

This App aims at apply to MEG signals temporal filtering (lowpass, highpass, or bandpass), and optionally a notch filter and a resampling. To do so, the MNE Python functions raw.filter, raw.notch_filter, and raw.resample are used.

This App is supposed to be applied on MEG signals preprocessed beforehand with MaxFilter

GitHub repository

Brainlife datatype used:

• For input: neuro/meg/fif

• For outputs: neuro/meg/fif and report/html

Inputs of the App

Outputs of the App:

Steps

The python file temporal_filtering.py is composed of several functions:

• Function temporal_filtering()

1. Apply a lowpass, highpass, or bandpass filter

2. Optionally apply a notch filter

3. Optionally resample the data

4. Save file

• Function _compute_snr()

Computes a SNR before and after MaxFilter. The steps of that function are described here.

• Function _generate_report()

1. Plot data in time domain

2. Plot data in frequency domain

3. Create info about raw data

4. Display SNR values

5. Save report

• Function main()

1. Parse the config.json

2. Raise an exception if both l_freq and h_freq are None

3. Apply temporal_filtering()

4. Display info message about the filtering applied

5. Apply _compute_snr()

6. Apply _generate_report()

Parameters of the App

The parameters of the App correspond to the parameters passed to the Python functions used in the App. They are listed in the config.json.example when you test your App locally, then when you register you App on Brainlife, you enter them and a config.json is created by Brainlife.

For app-temporal-filtering, the user will be able to choose the following parameters (a default parameter will be proposed). Three different MNE Python functions are used in this App:

1. Function raw.filter()

• l_freq

  • NUMBER

  • default: None

• h_freq

  • NUMBER

  • default: None

Some parameters are in the “Advanced” section because it’s best to keep their default values:

• picks

  • ENUM

  • either meg, eeg, [“meg”, “eeg”], mag, grad, or None (i.e. all channels except for the bad ones)

  • default: None

• filter_length

  • STRING

    • default: auto

• l_trans_bandwidth

  • NUMBER

    • default: auto

• h_trans_bandwidth

  • NUMBER

    • default: auto

• n_jobs

  • NUMBER

    • default: 1

• method

  • STRING

    • either fir or iir

    • default: fir

• iir_params

  • to be determined

• phase

  • ENUM

    • either zero or zero-double

    • default: zero

• fir_window

  • ENUM

    • either hamming, hann, or blackman

    • default: hamming

• fir_design

  • ENUM

    • either firwin or firwin2

    • default: firwin

• skip_by_annotation

  • ENUM

    • either ["edge", "bad_acq_skip"], ["edge"], ["bad_acq_skip"], or []

• pad

  • ENUM

    • either reflect_limited or any value of numpy.pad()

    • default: reflect_limited

2. Function raw.filter_notch()

• param_notch_freqs_start

  • NUMBER

    • default: 50 (in Europe power line artifact is at 50Hz, in the US it’s at 60Hz)

• param_notch_freqs_stop

  • NUMBER

    • default: 251 (in Europe, if MEG signals were recorded in the US, change it to 241)

• param_notch_freqs_step

  • NUMBER

    • default: 50 (in Europe, if MEG signals were recorded in the US, change it to 60)

Some parameters are in the “Advanced” section because it’s best to keep their default values:

• picks

  • ENUM

    • either meg, eeg, [“meg”, “eeg”], mag, grad, or None (i.e. all channels except for the bad ones)

    • default: None

• filter_length

  • STRING

    • default: auto

• notch_widths

  • NUMBER

    • default: None

• trans_bandwidth

  • NUMBER

    • default: 1

• n_jobs

  • NUMBER

    • default: 1

• method

  • STRING

    • either fir or iir

    • default: fir

• iir_params

  • to be determined

• mt_bandwidth

  • NUMBER

    • default: None

• p_value

  • NUMBER

    • default: 0.05

• phase

  • ENUM

    • either zero or zero-double

    • default: zero

• fir_window

  • ENUM

    • either hamming, hann, or blackman

    • default: hamming

• fir_design

  • ENUM

    • either firwin or firwin2

    • default: firwin

• pad

  • ENUM

    • either reflect_limited or any value of numpy.pad()

    • default: reflect_limited

3. Function raw.resample()

• sfreq

  • NUMBER

Some parameters are in the “Advanced” section because it’s best to keep their default values:

• npad

  • NUMBER

    • default: auto

• window

  • ENUM

    • see choices in scipy.signal.get_window

    • default: boxcar

• stim_picks

  • STRING

    • default: None

• n_jobs

  • NUMBER

    • default: 1

• events

  • NUMBER

    • default: None

• pad

  • ENUM

    • either reflect_limited or any value of numpy.pad()

    • default: reflect_limited