Parameters conversion to make an App run on BL

When an App is registered on Brainlife, a config.json is automatically created based on the info the App creator enters via the BL GUI. There are four types of parameters:

• NUMBER

• STRING

• ENUM

• BOOL

So, it is impossible to enter a list of int or a numpy nd.array for instance. So, the values must be converted.

Case of a numpy.nd.array

It is impossible to enter a np.nd.array in BL. So we register such parameter as a STRING and ask the user to enter floats separated by a comma: 10, 15, 20. In the config.json, such parameter will be written as:

{
"param_notch_widths": "10, 15, 20"
}

In the Python file, we added:

if isinstance(config['param_notch_widths'], str):
    config['param_notch_widths'] = list(map(float, config['param_notch_widths'].split(', ')))
    config['param_notch_widths'] = np.array(config['param_notch_widths'])

Case of a slice

It is also impossible to enter directly a slice on BL. So we enter the parameter as a STRING. In the config.json, such parameter is written as follows:

{
config['param_picks_by_channel_indices']: "0, 10, 2"
}

In the Python file, we added:

if isinstance(picks, str) and picks.find(",") != -1 and picks.find("[") == -1 and picks is not None:
    picks = list(map(int, picks.split(', ')))
    if len(picks) == 2:
        config['param_picks_by_channel_indices'] = slice(picks[0], picks[1])
    elif len(picks) == 3:
        config['param_picks_by_channel_indices'] = slice(picks[0], picks[1], picks[2])
    else:
        value_error_message = f"If you want to select channels using a slice, you must give two or three elements."
        raise ValueError(value_error_message)

Case of a tuple

A tuple can not be entered on BL. So we registered the parameter as a STRING. In the config.json, such parameter is written as follows:

{
"param_baseline": "0, None" 
}

To convert it into a tuple, in the Python file we added:

if isinstance(config['param_baseline'], str):
    param_baseline = list(map(str, config['param_baseline'].split(', ')))
    param_baseline = [None if i=='None' else i for i in param_baseline]
    param_baseline = [float(i) if isinstance(i, str) else i for i in param_baseline]
    config['param_baseline'] = tuple(param_baseline)

The first step is to convert it into a list and then convert the elements of the list into the right type. For tuple parameters in which their elements are the same type, there is no need to compute the two list comprehensions:

if isinstance(config['param_tuple_floats'], str):
    config['param_tuple_floats'] = list(map(str, config['param_tuple_floats'].split(', ')))
    config['param_tuple_floats'] = tuple(config['param_tuple_floats'])

Case of a list of integers/floats or strings

On Brainlife, when we enter a list, we have to use the type STRING and so the list is considered as a string, so they need to be converted.

Indeed, a list of floats or integers are written as follows in the config.json:

{
param_picks_by_channel_types_or_names: "[0, 2, 1]"
}

and a list of str:

{
list_of_strings: "[a, b, c]" 
}

So, we first need to convert it into a list and then convert the elements of the list into the right type.

For a list of strings:

if isinstance(picks, str) and picks.find("[") != -1 and picks is not None:
    picks = picks.replace('[', '')
    picks = picks.replace(']', '')
    config['param_picks_by_channel_types_or_names'] = list(map(str, picks.split(', ')))

If you want to convert it into a list of floats or ints, just replace str in list(map(str, picks.split(', '))) by the type you want.

If the list is empty, the user must enter []. In the Python code it will be converted into an empty list:

if config['param_extended_proj'] == '[]':
    config['param_extended_proj'] = [] 

Cases when a parameter can be two types

When the App is run locally, this configuration is not an issue, but on Brainlife when you define the parameter, it must be either a STRING, a NUMBER, a BOOLEAN, or an ENUM.

Case when a parameter is either a str or a float/int

When a parameter can be both a str or a float/ int, we registered it as a STRING on BL, and then we convert it into a float or int.

But we must be careful: we only want to convert a str into float/int when the App runs on BL. For instance the parameter param_filter_length can be “auto”, a str with the duration in s, or ms, or a int. So to be sure that the conversion into float happens only on Brainlife and only when the user does want to use a float:

if config['param_filter_length'] != "auto" and config['param_filter_length'].find("s") == -1:
    config['param_filter_length'] = int(config['param_filter_length'])

Case when a parameter is either a str or a bool

When a parameter can be both a str or a bool, we registered it as a STRING or ENUM on BL (either way, it is considered as a str), and then we convert it into a bool.

For instance the parameter param_proj can be “delayed”, or a bool. So, we registered it as an ENUM parameter and convert "True” and “False“ into a bool:

if config['param_proj'] == "True":
    config['param_proj'] = True
elif config['param_proj'] == "False":
    config['param_proj'] = False